Wiki source code of 3d prints
Version 1.10 by Kevin Wiki on 2026/07/19 10:44
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | Workflow of painting PLA prints: |
| 2 | |||
| |
1.2 | 3 | * sand down and cut away any unwanted artifacts of the print |
| |
1.10 | 4 | * prime object, current favorite primer is [[asdfasdfasdf|path:/bin/get/Painting/3d%20prints/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=xwiki%3APainting.3d%20prints.asdfasdfasdf.WebHome&typed=]]. |
| |
1.4 | 5 | * select or mix acrylic paint |
| 6 | * remember to clean brushes before placing back in storage | ||
| 7 | |||
| |
1.5 | 8 | # Paints |
| |
1.4 | 9 | |
| |
1.8 | 10 | Current plan is to find some large bottles > 500 ml which we can cut cost and reduce need to continuously source certain colors. |
| |
1.9 | 11 | |
| |
1.10 | 12 | the best recommendation seems to be Vallejo branded. |
| 13 | 669,- NOK They come in sets at 16 [https://gamezone.no/miniatyrhobby/160912/vallejo-game-color-set-introduction](https://gamezone.no/miniatyrhobby/160912/vallejo-game-color-set-introduction). | ||
| 14 | |||
| 15 | Empty 17 ml clear bottles 25 pcs - [https://www.ebay.com/itm/176567959914](https://www.ebay.com/itm/176567959914) | ||
| 16 | |||
| 17 |