Changes for page Front I/O

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -216,13 +216,55 @@
216	216	* fan LED (red & green)
217	217	* temperature LED (red & green)
218	218	* compute LED (unknown)
	219	+* lock switch
219	219
220		-Each side is driven by each their PCA9554 shift register. The registers represent the following LEDs: (Note that Lock LED is only present for the LEFT side)
	221	+Each sides bank of LEDs are driven by each their PCA9554 shift register. The registers represent the following LEDs: (Note that Lock LED is only present for the LEFT side)
221	221
222	222	|=(% scope="row" %)Register|1|2|3|4|5|6|7
223	223	|=Device|Power LED Green|Power LED Red|Fan LED Green|Fan LED Red|Temperature LED Green|Temperature LED Red|Lock LED
224	224
225	225	To control each LED we shift either a 0 to turn off or 1 to turn on. Since each device shares a single red/green LED (power LED green & power LED red) setting both to 1 at the same time will always leave it red. That is when power LED green and power LED red are both enabled, red always takes precedence.
	227	+
	228	+Use following script to power LEDs one at a time:
	229	+
	230	+{{code language="c++"}}
	231	+#include <PCA9554.h> // Load the PCA9554 Library
	232	+
	233	+PCA9554 ioCon1(0x24); // Create an object at this address
	234	+
	235	+uint8_t mapIO = 0b10000000;
	236	+
	237	+void shiftL() {
	238	+ mapIO = (mapIO << 1) | ((mapIO & 0x80) >> 7);
	239	+}
	240	+
	241	+void write() {
	242	+ Serial.println("writing to PCA9554 device");
	243	+
	244	+ for (int i = 0; i < 8; ++i) {
	245	+ ioCon1.digitalWrite(i, (mapIO & (1 << i)) ? 0 : 1);
	246	+ }
	247	+}
	248	+
	249	+void setup()
	250	+{
	251	+ Serial.begin(9600);
	252	+ Serial.println("Setup");
	253	+
	254	+ ioCon1.portMode(ALLOUTPUT);
	255	+}
	256	+
	257	+void loop()
	258	+{
	259	+ write();
	260	+ shiftL();
	261	+
	262	+ delay(500);
	263	+}
	264	+{{/code}}
	265	+
	266	+
	267	+
226	226	)))
227	227
228	228